Many companies will be equipped with a certain amount of fabric furniture in the reception room, which can make the received customers feel close. The fabrics used in these fabric furniture are mostly soft and comfortable types, which are easy to get dirty and easy to damage. You need to pay special attention to their cleaning problems during maintenance. For products made from imported fabrics that have undergone dust-proof and anti-fouling treatment, they can be cleaned only by wiping with a clean wet towel. For those products that are particularly easy to dirty and break, it is best to send them to a professional cleaning shop for cleaning to prevent deformation and extend their service life.
Electroplating and sandblasting glass
Office furniture such as electroplating and sandblasted glass are mostly products such as coffee tables and chairs in the staff lounge. The surface of these office furniture is bright, and it is easy to see fingerprints and stains on the surface of the product. However, this type of product is much easier to maintain than the above three types. Usually, just avoid placing it in a sleepy environment; when cleaning, you only need to wipe it lightly with a dry cloth to be bright as new. However, you must be careful when moving it, and you can’t hold the glass table to move.
Solid wood office furniture is mostly office desks and chairs. Pay more attention to the three aspects of cleaning, placing and moving. When cleaning, avoid sharp scratches. For stubborn stains, do not use wire brushes or hard brushes to clean. Use a soft cloth dipped in strong detergent to wipe. When placing it, please also pay attention to avoid direct sunlight as much as possible, because that will quickly oxidize the paint on the surface. In addition, be careful when moving to avoid bumping and damaging the painted surface.
Leather office furniture is mostly used in high-level leadership offices to show corporate taste. It has good softness and color, and is easily damaged if it is not maintained well. In the maintenance, more attention should be paid to the placement and cleaning. When placing it, like wood office furniture, it should be kept away from direct sunlight. When cleaning, it should be wiped with a fine flannel cloth dipped in a small amount of water, and then wiped with a soft dry cloth. It is best to use for stubborn stains
In our lives, some friends will ask how to maintain our panel furniture to better extend the service life.
First of all, the floor where the panel furniture is placed must be kept flat, and the four legs must land on the ground in a balanced manner. If the panel furniture is placed in a state of frequent swaying and unstable, it will inevitably cause the fastening parts to fall off and the bonding part will crack over time, which will affect the use effect and reduce the life of the panel furniture. In addition, if the floor is soft and the panel furniture is unbalanced, do not use wood or iron to cushion the legs of the furniture, so that even if the balance is maintained, it is difficult to bear the force uniformly, which will damage the internal structure of the panel furniture for a long time. The compensation method is to trim the ground, or use a larger area of hard rubber board to lay the ground, so that the four legs of the panel furniture can land on the ground smoothly.
Second, it is best to use pure cotton knitted cloth when removing dust on panel furniture, and then use a soft wool brush to remove the dust in the depression or embossment. Painted panel furniture should not be wiped with gasoline or organic solvents, and can be wiped with colorless furniture polishing wax to enhance gloss and reduce dust.
Third, it is best not to place the panel furniture in direct sunlight. Frequent sunlight will discolor the paint film of the furniture, the metal fittings are prone to oxidation and deterioration, and the wood is prone to brittleness. In summer, it is best to use curtains to protect the panel furniture.
Finally, it is necessary to maintain indoor humidity. Don’t let the panel furniture get damp. In the spring and autumn, the humidifier should be used for a limited time to prevent damage to the furniture due to excessive humidity. Usually use as little water as possible to clean the furniture, and avoid using alkaline water. It is only advisable to wipe with a damp cloth that has been squeezed out of water, and then wipe it with a dry cloth.
As long as you do the above points, your panel furniture will last for a long time to retain a bright and beautiful feeling.
Post time: Jul-30-2021